居家修繕美化大師_女媧補天膨拱修補彈性砂漿 25kg 灰色 / Repair Wall Bulging Elastic Mortar 25kg Grey

【產品簡介/Introduction】

除了水泥砂漿外，目前市面上幾乎找不到能夠簡單且有效修補「天花板、牆面膨拱（裂開隆起）」的原料。

即使是聘請專業泥作師傅團隊，他們仍然都還是使用水泥砂漿來填補，不僅工資高昂，保固年限不長外，手藝好且有良心的師傅更是愈來愈難找到，對於一般沒有居家修繕經驗的人來說，想要自行動手DIY更是難上加難。

本產品專門為了能自行補平牆面膨拱而研發。有別於一般傳統水泥砂漿，能提供不易垂流、抵擋地震撕扯的軟Ｑ彈性、卓越的防水能力、強力附著於光滑表面、快速乾燥，並能承受高濃度酸鹼溶劑侵蝕，目前市面上並無類似的原料。

Apart from cement mortar, there is currently a lack of readily available materials on the market that can effectively and simply repair "ceiling and wall bulges (cracks and swelling)".

Even when hiring professional plastering teams, they still use cement mortar for repairs. Not only is this costly and has a limited warranty period, but finding skilled and conscientious craftsmen is becoming increasingly difficult. For those without home repair experience, attempting DIY repairs is even more challenging.

This product has been specifically developed to address the issue of self-repairing wall bulges. Unlike traditional cement mortar, it offers non-drip properties, earthquake-resistant elasticity, exceptional waterproofing, strong adhesion to smooth surfaces, rapid drying, and resistance to high concentrations of acidic and alkaline solvents. Currently, there are no similar materials available on the market.

【產品特色/Feature】

1.水性配方，無刺鼻氣味，操作與收尾輕鬆方便，無石灰成分，不傷手；

2.隨開即用，免自行攪拌、混合或調配，原料沒用完仍可保存一年；

3.極高附著力，本身具備優越防水效能，同時抵擋強酸、強鹼侵蝕；

4.乾後保有彈性，可抵擋劇烈溫差變化、紫外線與地震拉扯；

5.操作工具簡單且容易取得，7~70歲都會操作；

1. Water-based formula, odorless, easy to apply and finish, devoid of lime content, gentle on hands.

2. Ready for use upon opening, no need for self-mixing, blending, or preparation. Unused material can be stored for up to a year.

3. Extremely high adhesive strength, inherent superior waterproofing capability, and resistance to strong acids and alkalis.

4. Retains flexibility after drying, able to withstand drastic temperature changes, UV exposure, and seismic forces.

5. Simple and easily obtainable tools for operation, suitable for ages 7 to 70.

【使用說明/Application】

請將準備要處理的牆面進行清潔，剷除鬆脫水泥塊並以濕抹布清除粉塵，特別是汙垢、灰塵、砂土、油漬或發霉等皆請先徹底清理。接著取用本產品直接填補於凹陷處並抹平即可。

Ensure that the wall surface you intend to treat is clean. Remove any loose cement chunks and wipe away dust with a damp cloth. Especially focus on thorough cleaning for dirt, dust, sand, oil stains, or mold. Next, take this product and apply it directly to the recessed area, then smooth it out.

【操作注意事項/Precautions】

1.盡可能敲除鬆脫水泥塊，敲除過程請注意自身、旁人與家具設備安全防護；

2.敲除後使用毛刷、空氣噴槍等清理粉塵；

3.使用鏝刀、刮刀等工具挖取原料，牆面噴點水後壓上去，以增加附著力；

4.用力壓上去後要將鏝刀、刮刀輕轉幾下並向旁邊橫向拉走，以免原料脫落；

5.逐次增加塗布範圍，每次都需要搭上原來已塗抹範圍的1/4~1/3以上；

6.接著可以逐次增加厚度，方式如前述第3~第5點；

7.最大厚度勿超過3cm，太深的洞需要多次填補，以免整塊掉落白做工；

8.工具難以操作的畸零角和凹陷深洞，可用手挖取原料用手指塞入；

9.完全乾燥時間和塗布厚度及環境溫溼度有關；

10.少於3cm深度的坑洞，可於6小時後繼續下一步驟。

11.沒有用力將原料壓緊，或是原料填塗抹得不夠，完全乾燥後表面可能出現少許裂痕，只要使用「高附著填縫封壁泥」填平即可；

12.操作過程中掉落的原料不要丟棄，可收集回容器中攪拌一下繼續使用；

13.填補過程在坑洞邊緣可能會與原牆面不平整，可用濕抹布加以抹平；

14.完成後若仍感覺有些許不平整，可用「超抗裂彈性防水泥」抹平；

15.本產品乾燥後質地軟Ｑ有彈性抗地震拉扯，不得視為可取代水泥砂漿之原料。

1. Whenever possible, remove loose cement chunks, and exercise caution to ensure your safety, as well as that of others and surrounding furniture and equipment.

2. After removal, clean the area using a brush, air blower, or similar tools to clear away dust.

3. Use tools like trowels or scrapers to extract the material and apply it to the wall after dampening the area with water to enhance adhesion.

4. After firmly pressing the material, gently turn and pull the trowel or scraper sideways a few times to prevent material detachment.

5. Gradually expand the application area, making sure each application overlaps 1/4 to 1/3 of the previously applied area.

6. Gradually increase thickness as described in points 3 to 5.

7. Do not exceed a maximum thickness of 3cm. For deeper holes, multiple applications are necessary to avoid detachment.

8. In hard-to-reach corners and deep indentations, you can use your hand to apply and press the material.

9. Drying time depends on application thickness and environmental conditions (temperature and humidity).

10. For holes less than 3cm deep, you can proceed to the next step after 6 hours.

11. If not enough force is applied to compact the material or if the application is insufficient, minor cracks might appear on the surface after complete drying. These can be smoothed with the "Flexible Waterproof Putty".

12. Material that falls during the process should not be discarded; you can collect and mix it back into the container for further use.

13. The edges of filled holes might not align perfectly with the original wall surface. Use a damp cloth to smooth them out.

14. If slight unevenness remains after completion, you can use "Ultra Anti cracking Waterproof malleability Putty" to even it out.

15. Once dry, this product possesses a soft, elastic texture with seismic resistance, but it should not be considered a replacement for cement mortar.

【示範影片/Demo Video】