商品編號:DMBM2J-A900C4BL3
【南紡購物中心】

麥克風減震防震避震架AT8458a(兼容3/8-16和5/8-27

$2,499
$3,000
折價券
  • ●減少透過麥克風支架
  • ●兼容3
  • 8“1
  • P幣

    【限台灣Pay】單筆滿$1000送100P幣

  • 登記送

    【限APP下單】全站指定品單筆滿1124元送100P幣

  • 登記抽

    【限APP下單】全站指定品單筆滿1元抽羅技 無線輕量化電競滑鼠(桃紅色)

  • 登記抽

    【限APP下單】全站指定品單筆滿2424元抽Sony 3II 65型顯示器

付款方式
配送資訊
  • 廠商出貨
    本商品不受24h到貨限制
  • 可宅配到府
商品詳情
  • (本賣場是售"避震架" x 1組,詳細請參考賣場內文下方的●【內含】 )

    ●【品名】日本鐵三角Audio-Technica麥克風避震架mic減震架AT8458a防震架(兼容3/8“-16和5/8”-27公螺牙支架)適AT2020  AT2020USB AT2020USB+ AT2035 ATR-2500 XAT3035 AT3060
    ●減少透過麥克風支架,吊桿和安裝座傳輸的噪音、衝擊和振動。
    ●兼容3/8“-16和5/8”-27公螺牙支架→將減震架尾本身的螺牙轉接器拆下即可(若是要將裝在1/4"吋公螺牙上,您可以額外購買母1/4轉3/8公螺牙轉接器;我司有販售多款母1/4吋轉1/3吋公螺牙轉接器,歡迎選購)

     
    ●【廠牌】Audio-Technica(平行輸入)
     
    ●【型號】AT8458a
     
    ●【適用】適用於以下Audio-Technica型號的麥克風:
     
    AT2020、AT2020 USB、AT2020USB+、AT2035、AT2050、ATR-2500、
    AT3035、AT3060(Fits Audio-Technica Case Style(s): R5, R7)
    (註1)麥克風在裝上減震座後,部分麥克風上的調整操作將會稍微不順,基本上仍是
    可以調整的。
    (註2)我司目前拍攝影片是用ATR-2500搭配本款減震架,非常緊實!(ATR-2500
    夾持處直徑剛好就是51mm)
     
    →【適用麥克風夾握處直徑】:48~51mm
    (若您的麥克風夾握處直徑更小,再加上減震棉之類,亦可以使用喔)
    ●【規格】
    ●重量:約100公克
    ●尺寸:約長166x寬102x厚38mm
     
    ●【安裝方式】
    將適用的麥克風直接從AT8458a防震支架的頂部滑入,麥克風應該就可到達定位,當麥克風可被固定,就是正確安裝。也就是當麥克風避震架時,麥克風中的凹槽將會抓住帶,並因此將麥克風固定到安裝位置。
     
    ●【HOW to RE-STRING】(以下是用AT8441 & AT8449 來作示範說明)

    Remove the basket from the frame Examine how the old elastic is strung through the basket Remove old elastic and rubber bandsReplace both rubber bandsStart weaving the elastic at the 8 holes side Use the third hole fromthe left to start Leave enough elastic to clamp when finished  long) Hold this with your left thumb.

    From the back, thread the elastic through the fourth hole and backthrough the next hole Leave enough slack to use for mounting. (hintpull elastic tight on the inside of the basket.)

    Continue weaving the elastic until you get back to where you startedYou should have 4 loops to mount the basket to the frame

    Thread the elastic through the hole directly below It should be next tothe end of the elasticTurn the basket upside down.

    Continue weaving the elastic just as you did on the other end Once you are done, clamp the 2 loose ends 2 sections of elastictogether with needle nose pliers Trim any extra elastic.

    Completed Basket

    Mount the basket back into the frame using the elastic loopsCompleted AT8449Completed AT8441AT8441

    ●【內含】避震架x1個(原廠盒裝)

    audio-technicaAT8458a20 Series Shock MountSuspension Antichoc  20

    ※包裝圖片僅為示範說明用,因廠商時有調整商品外包裝的情形,請依實際收到為準喔。
     
    ●【其它注意事項】
    ●7天新品不良換新。
    ●關於色差,由於光線問題,圖片色彩與實物之間存在的色差在所難免,請以收到實物為準。
    ●若您要退換貨,請務必保持包裝完整,若包裝有受損,請恕不接受退換貨。
購物須知

別人也看了